Ignition module - Ignitor III - 12 Volts
- In stock
- Shipped within 48 h
- Supplied individually
Brand : Pertronix
Reference : SP-82435
The Ignitor III module is the greatest evolution of ignition modules. It is only compatible with 0.32 ohm coils which allows a very strong spark power to the spark plugs.
It also integrates a microprocessor that manages the Dwell angle according to the engine speed to obtain the best ignition and allow cutting adjustment from 4500 to 9000 rev/min. in bands of 100 rev/min.
After assembly, the advance point must be adjusted with a strobe lamp.
Module for 009 distributors without advance lung and 050 without advance lung.
Static install: 10° at idle.
The "Slideperformance" tip: to improve the performance of your Ignitor II kit, use a PERTRONIX FLAME THROWER II reference SP-330-200 under penalty of burning the module.
The advantages :
- ease of assembly
- no more adjustments to make
- improves combustion thanks to a better spark in the spark plugs.
- less pollution
- no more platinum failures from 5500 rev/mn
- decrease in consumption
- better idle
- facilitated ignition
Be careful when connecting it: during assembly of the module it is imperative to correctly recognize the cables with respect to the coil under penalty of immediate destruction of the electronic module.
Burned module: no warranty
Electrical parts do not have a warranty nor are they changed.
For static adjustment: it is imperative to use a specific LED, do not forget to add it to your order reference: SP-20026.
Maximum quality module.
MADE IN THE USA
-
Application :
- All models